304L Stainless Steel Sanitary Fittings
304L and 316L stainless sanitary elbows, tees, reducers, ferrules and unions with controlled internal finish for food, beverage and hygienic utility systems.
Supply routes
- Qualified partner-mill sourcing
- Stock coordination
Specifications
| Grades | 304L or 316L |
|---|---|
| Types | Elbow, tee, reducer, ferrule, clamp and union |
| System | ASME BPE, ISO or DIN series as specified |
| Ends | Weld, clamp or hygienic union |
| Internal surface | State maximum Ra and finish route |
| Cleaning | Project-specific cleaning and packaging on request |
| Documents | Inspection documents and traceability records as ordered and confirmed in the quotation. |
| Commercial basis | Quantity, MOQ, production route and delivery schedule are confirmed for each quotation. |
Dimensions and Tolerances
| Other | Drawing, nominal size or ordered section must be confirmed during specification review. |
|---|---|
| Order basis | Governing product and dimensional standard, delivery condition and any drawing-specific limits. |
| Special tolerances | Must be stated in the RFQ and accepted in the quotation before production. |
Published ranges are technical references, not a live-stock or production-capability promise. The final range, MOQ and delivery schedule are confirmed in the quotation.
Edge or end condition
- Weld, clamp or hygienic union; final condition as ordered.
Testing and inspection
- Tests required by the governing purchased standard.
- PMI, NDE, corrosion, roughness or other supplementary inspection only when specified and confirmed in the quotation.
Order documents
- Inspection document type and content as ordered.
- Heat or lot traceability and supplementary reports when included in the accepted inspection plan.
Export packaging
- Export packing selected for product form, finish, dimensions, weight and transport route.
- Film, caps, interleaving, skids, cases or moisture protection only as confirmed in the order.
Do not mix hygienic systems by nominal size
ASME, ISO and DIN tube systems can use different outside dimensions, wall, ferrules and gasket geometry. Identify the complete system and connection standard rather than ordering only by inch or millimeter size.
Product-contact surface
Specify internal Ra, polishing or electropolishing route, weld treatment, cleaning, capping and packaging. Acceptance can include surface records and inspection under defined lighting.
Grade selection
304L serves many neutral food and utility applications; 316L adds margin for salt, acidic products and aggressive cleaning. Product chemistry and cleaning temperature should be reviewed together.
Technical content updated: 2026-07-29
Organizational author: Tsingshan (Shandong) Iron & Steel Co., Ltd..Review method, status and limitations.
Typical Applications
Related technical resources
Published standards
Applicable standards
ASME BPE · DIN 11850 · ISO 2037
Finishes and processing
What to Include in Your RFQ
Use the published values as a starting point, then identify the exact ordered option and acceptance criteria.
- Grade and governing standard
- 304L, 316L; ASME BPE, DIN 11850, ISO 2037. State the exact ordered combination.
- Dimensions and tolerances
- Provide other and identify which order basis, special tolerances requirements govern acceptance.
- Finish, processing and edge or end condition
- ; state any additional processing; Weld, clamp or hygienic union; final condition as ordered..
- Inspection, documents and packing
- Testing: Tests required by the governing purchased standard.; PMI, NDE, corrosion, roughness or other supplementary inspection only when specified and confirmed in the quotation. Documents: Inspection document type and content as ordered.; Heat or lot traceability and supplementary reports when included in the accepted inspection plan. Packing: Export packing selected for product form, finish, dimensions, weight and transport route.; Film, caps, interleaving, skids, cases or moisture protection only as confirmed in the order.
- Quantity, destination and requested delivery window
- State quantity per size, unit, delivery city or port, requested trade term and required delivery window so the supply and freight route can be confirmed.
Frequently Asked Questions
What information is needed to quote 304L Stainless Steel Sanitary Fittings?
Send the grade, governing standard, dimensions, tolerance, finish, quantity, testing, document, packing and destination requirements.
Are the listed 304L Stainless Steel Sanitary Fittings dimensions guaranteed available?
No. Published dimensions are technical references; actual availability, production route, MOQ and delivery schedule are confirmed for each quotation.
Which inspection documents are available for 304L Stainless Steel Sanitary Fittings?
State the required document type and supplementary tests in the RFQ. The exact document package is confirmed before the order is accepted.
RFQ
Request a Quotation
Send the specification you have; we will identify missing inputs before quoting.